Printronix Integrated Network Interface Card, User Manual

Page: 222 / 310

Chapter 12
Command Shell Overview
218
Main npsh Command Prefixes
All configurable commands either start with
store
or
set
, and
view commands start with
list
.
NOTE: If the
store
prefix is used, the NIC must be repowered to
make the changes take effect. Since
store
affects flash
memory settings only, the print server must reset and read
the new settings now in flash memory.
NOTE: If the
set
prefix is used, a
save
command must be
executed as well so that the new settings are retained after
power cycles. Since
set
only affects the settings in
memory, they will be lost after a power cycle unless they
are saved to flash memory.
Getting Command Help
The NIC command shell provides several online help tools,
including:
“?” Command
Typing “
?
” when logged in to the command shell will produce a full
list of all available commands.
Command Prefixes
Typing in the first portion of a command will produce an error
message showing the correct syntax. For example, typing in
store
tcpip
will produce a list of all commands that start with this prefix.