36
Statistics Submenu
Clear Data
ODV-2D > Statistics > Clear Data
The ODV-2D reports on all bar codes it detects since the last data reset. For
example, you print a large batch of labels with bar codes and then print a
validator report. Then you print another batch of labels with bar codes and
print another report. The report will contain information on both batch jobs.
However, if you reset the validator data between batch jobs, the second re-
port will only contain information on the second batch job.
This executable menu will clear all the statistics shown in this Statistics
submenu.
Good Barcodes
ODV-2D > Statistics > Good Barcodes
The number of bar code reports sent from the ODV-2D since the last Clear
Data command.
Good Forms
ODV-2D > Statistics > Good Forms
The number of good (non-overstruck) forms printed since the last Clear Data
command.
Overstrike Forms
ODV-2D > Statistics > Overstrike Forms
The number of forms containing a bar code that fell below the minimum ac-
ceptable level since the last Clear Data command.
Average BWD
ODV-2D > Statistics > Average BWD
The average of all Bar Width Deviations reported since the last Clear Data
command, shown as a percentage.
Last BWD
ODV-2D > Statistics > Last BWD
The Bar Width Deviation included in the most recent report received from the
validator, shown as a percentage.
IMPORTANT
A bar code’s Bar Width Deviation is determined by comparing the bar width the
ODV-2D expects to the bar width that is actually printed. For example, if the bar
width is printed exactly as the validator expects, the BWD is 0%. However, if the bar
width as printed is 25% wider or narrower than the validator expects it to be, it
reports a BWD of 25%.
Validator F/W
ODV-2D > Statistics > Validator F/W
Shows the firmware version installed in the ODV-2D.
