18
Return Data
ODV-2D > Control > Return Data
This option enables the ODV-2D to send data out the status port as defined
by
System > Printer Mgmt > Ret. Status Port.
If System > Printer Mgmt > Ret.
Status Port uses E-NET Stat Port, use System > Printer Mgmt >Status Port
Number to set port.
This feature is designed to work best with
ODV-2D > Control > Validator Ac-
tion
set to
Retry Form
.
Disable
No data will be returned through the status port.
Data+Grade
The following data will be sent out the status port for
every barcode found:
Grade, Barcode Data <Carriage Return><Line Feed>
Data+Grade+Fail
In addition to barcode grades and data, a failure indi-
cation will be sent out the return status port if the val-
idator fails a label Max Retry times:
FAIL<Carriage Return><Line Feed>
Factory Default
Disable
IMPORTANT
When the menu is set to something other than
Disable
,
the printer will automatically change
ODV-2D > Control
> Telemetry Data
to
Full Report
since it is required for
the feature.
If, however, the user subsequently changes
Telemetry
Data
to something different, barcode grades data will
no longer be returned.
Telemetry Data
ODV-2D > Control > Telemetry Data
The validator sends a report to the selected data output destination. There
are three different options based on this menu.
Short Report
Default setting. Provides the encoded failure cause or
pass indication and the bar width deviation, shown as
a percentage.
Full Report
Provides a completed report of all the data captured
by the validator.
Validation
Mode
Provides the same data as the Short Report, but adds
the actual bar code data read.
Factory Default
Short Report
