Primus FF10, Programming Manual

Page: 50 / 136

48 PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC
T
THE WASH SEQUENCE
°C : degrees Celsius
°F : degrees Fahrenheit
•
The temperature can be programmed between 1°C and 92°C.
•
60°C is the suggested default value.
•
Insert the desired temperature. Press the ENTER button for
confirmation.
Top Soap-Hopper washing machines
•
4 Inlets can be programmed. I1, I2, I3, I4, I5 and I6 are
available.
•
For a default value of 60°C, the suggested inlet valves are
I3, I4 and I5.
•
The suggested inlet valves are related to the temperature
and the soap box.
•
Insert the desired inlet valves. Press the ENTER button for
confirmation.
Front Soap-Hopper washing machines
•
3 Inlets can be programmed. I1, I2, and I3 are available.
•
For a default value of 60°C, the suggested inlet valves are
I2 and I3.
•
Insert the desired inlet valves. Press the ENTER button for
confirmation.
Attention !
If you insert other inlet valves than the suggested ones,
problems can occur at the water fill process.
•
The suggested Water Level corresponds with the Normal
Low water level.
•
The suggested water level depends on the machine type.
•
Check the corresponding table paragraph 3.4.
•
The water level can only be programmed within certain limits.
•
Insert the wished water level. Press the ENTER button for
confirmation.
•
The suggested drum speed value depends on the machine type.
•
Check the corresponding table paragraph 3.4.
•
The drum speed value can only be programmed within
certain limits.
Prewash |
Wash
| Cooldown | Rinse | Last Rinse | Soak | Flush | Spray | No wash
P:Pr XX Step XX
Temp : 60 °C
P:Pr XX Step XX
Inlet : _ _ _ _
P:Pr XX Step XX
Level : _ _
P:Pr XX Step XX
RPM : _ _
!