Primus FF10, Programming Manual

Page: 37 / 136

100962 G PUBLICATION DATE 24 JUN 2008.DOC PROGRAMMING MANUAL 35
•
Only for MB90 – 140 – 180.
•
At the end of the wash cycle, the Inner Door of the Drum is
positioned automatically at the hole Outer Door Tub.
•
If the Auto Position system should get broken, you can
switch off the Auto Position System.
Then the operator has to position the drum manually as a
standard MB-machine.
•
Yes is the default value.
•
Confirm by pressing the ENTER button.
Attention !
Look inside the tub through the door glass before unlocking
the outer door, check that the inner door is positioned correctly
•
You can erase all the wash programs at once.
•
This function should only be used at the installation of a new
Full Control Wash Computer and if you want to ensure that
no old programs stay in the memory of the computer.
•
Select Yes or No and you have to confirm by
pressing the ENTER button.
•
By selecting YES, a new request for confirmation is
displayed. C: Delete all Programs ? No
•
Press the YES and ENTER button to confirm once more.
•
All the memory Blocks will be cleared one by one.
•
If you want to make use of the 15 Standard wash programs,
these standard programs must be loaded into the Wash
Program Memory of the Full Control Computer.
•
Press the ENTER button if you want to Load the Standard programs.
•
Then you can Select the language of the Wash Program name.
•
By the Wash Program Name the operator knows which kind
of wash process the program corresponds with.
•
You can select the Language from a list by pressing the
ARROW LEFT or RIGHT button and you have to confirm by
the ENTER button.
•
Then a Confirmation is asked before the First 15 wash
program’s will be loaded.
•
By pressing the Yes and ENTER button, the 15 Standard
program’s will be loaded at the Program numbers 1 to 15.
•
The Standard wash program‘s can be found in this manual
at chapter 7.
C:Erase All
Wash Prog?
C:Load Standard
Programs?
C:Language
English
C:Load Program
1 – 15 ? No
C:Auto Position
Drum : Yes