PTBurn SDK
Page 37 of 53
© 2005, Primera Technology, Inc. Primera is a registered trademark and Bravo is a trademark of Primera Technology, Inc. All other trademarks
are the property of their respective companies.
There is another .INI file packaged with PTBurn that can affect robotics behavior. Actually,
there are several files included, but the name of the file used depends on the unit being utilized.
For Disc Publisher, Disc Publisher II, and Disc Publisher PRO, the name of the file is the same
as the Printer name with “_CFG.INI” appended. So, for Disc Publisher II the file is called “Disc
Publisher II_CFG.INI”, and for Disc Publisher PRO the file is called “Disc Publisher
PRO_CFG.INI”. For the ComposerMax, the filename is called “PxRobo_MAX.INI”.
This file is modified by PTBurn when you change settings at Settings/Options within PTBurn.
This file is also packaged as a loose file and can be modified before deployment. After
installation, the location of this file can also be obtained from the Registry using the DataPath
key as described for PTSETUP.INI above.
; Beginning of Disc Publisher II_CFG.INI
[SETTINGS]
; INI for PTBurn PxRobo for Disc Publisher II
; This determines if Printing and Recording are to be done simultaneously or not.
; 0 = do not Print and Record at the same time
; 1 = Print and Record simultaneously
Record-Print=1
; This determines if Kiosk mode is enabled or not (Kiosk mode places discs onto front slide
instead of left bin)
; 0 = Kiosk disabled
; 1 = Kiosk enabled
Kiosk-Mode=0
; This determines if a rejected disc will have the word "REJECT" printed onto the disc.
; 0 = don't print Reject
; 1 = print reject
Print-Reject=0
; This determines if a warning will be displayed if Surething is not installed
; 0 = don't show warning
; 1 = show warning
Show SureThing Question=1
; This determines if the printing dialog is minimized or not.
; 0 = not minimized
; 1 = minimized
MinimizePrint=1
