PTBurn SDK
Page 32 of 53
© 2005, Primera Technology, Inc. Primera is a registered trademark and Bravo is a trademark of Primera Technology, Inc. All other trademarks
are the property of their respective companies.
The DiscID should contain the id of the disc that is being processed (ie. the X value from
LoadDiscStateX = in the Status file). See
Appendix D
for an example of how to use this
message with the load/unload override functionality.
4.8 Unload Command
The Unload Disc Command will cause the unit to leave one of the two wait states (prior to
recording or once recording is finished) and unload the disc. This command is only valid when
LoadUnloadOverride was set to YES in the jobs jrq file.
Message=
PROCESS_DISC
DiscID=X
The DiscID should contain the id of the disc that is being processed(ie. the X value from
LoadDiscStateX = in the Status file). See
Appendix D
for an example of how to use this
message with the load/unload override functionality.
4.9 Check Bins Command
The “Check Bins” command will cause the Disc Publisher to check each bin for the number of
discs remaining. It will then update the DiscsInLeftBin and DiscsInRightBin values of the status
file. The .ptm file can have any name and should be formatted as follows:
Message=
CHECK_DISCSINBIN
ClientID=Administrator
The ClientID should ALWAYS be fixed to “Administrator”. This command will only work if
there are no jobs in the system.
