PTBurn SDK
Page 13 of 53
© 2005, Primera Technology, Inc. Primera is a registered trademark and Bravo is a trademark of Primera Technology, Inc. All other trademarks
are the property of their respective companies.
NO
The default value is NO if this key is not given.
2.1.26
ReadDataTo
This key specifies the location to which data from the disc(s) should be stored (this is useful for
saving the contents of a disc for later use). If the ReadDataFormat key is set to ReadData, then
this key contains the path of where the data from the disc should be written to the hard disk
drive (ex. C:\MyDisc1). If ReadDataFormat is ReadGI, then ReadDataTo specifies the path and
GI file name that should be created (ex. \\Computer\PTBurnJobs\ReadFile would create the
global image file \\Computer\PTBurnJobs\ReadFile.gi ). When using ReadGI as the format you
should NOT specify the .gi extension in the ReadDataTo key because PTBurn will append the .gi
extension to the name.
2.1.27
ReadDataFormat
This key specifies the format in which the disc(s) will be stored onto the hard disk drive (into the
location specified by ReadDataTo). The possible values are as follows:
ReadGI
ReadData
The default value is ReadData, which will read the data from the disc and store the same data
onto the hard disk drive. ReadGI will create a Global Image file of the Disc. If the format is
ReadGI and the number of copies is greater than 1, then a _1, _2… will be appended to the GI
filename.
2.1.28
CreateSubFolders
This key will cause PTBurn to create a subfolder below the ReadDataTo path for each disc read.
The subfolders will be named Disc1, Disc2 … The possible values are:
YES
NO
The default value is NO if this key is not given. This key is only valid if ReadDataTo is
specified, ReadDataFormat = ReadData, and the number of copies is greater than 1.
2.1.29
CheckFileOnDisc
This key will cause PTBurn to check the disc prior to recording to see if the specified file exists.
The value of this key should be the complete path (on the disc) of the file. For example:
CheckFileOnDisc=Server\myFile.txt
will cause PTBurn to check to see if the file “myFile.txt” is on the disc in the “Server” folder. If
the file is not found then an Invalid Media Error (Job/Disc Error 10) will be set.
2.1.30
CheckSystemIDOnDisc
This key will cause PTBurn to check the disc prior to recording to see if the SystemID value in
the PVD matches the value of this key.
CheckSystemIDOnDisc=PTBurn
