41
Click on Test Alignment to print the alignment shown to the right.
Look at the print to determine how much white space is visible on
the edges. The black lines should print right on the leading edge
and left edge. In this example the Top of Form needs
approximately - 10.
1.
Left Margin Offset.
This value moves the printed label left
or right. Add to the current value to move the printed label
to the right. Subtract from the current value to move the
printed label to the left.
2.
Top of Form (TOF).
This value moves the print start position
up or down on the label. Add to the current value to move
the printed label down or toward the printer. Subtract from the current value to move the
printed label up or away from the printer. The value is automatically saved as soon as you
set it. You may have to make several adjustments to one or more of these values. After each
adjustment you can click the Test Alignment button to print a small test pattern on the label.
This will help you find the proper alignment value.
3.
Tear off/Cut Position.
This value adjusts the position of the last label printed after it has
been presented. This only applies if the output mode is set to "Present the label." Add to the
current value to move the tear point closer to the printer. Subtract from the current value to
move the tear point away from the printer. The value is automatically saved as soon as you
set it.
Adjust
Top of Form -10
