Getting Started
5
C. IDENTIFYING THE PARTS
Front View
The Pause Button pauses the printer during a print job. If pressed
when no print job is printing, it will prevent any new jobs from
beginning.
The Power LED indicates that the printer is on and ready to receive
print jobs.
The Load/Feed Button is pressed in order to load label stock if the
printer does not automatically detect the stock. When stock is
loaded each press of the button will cause one label to be fed from
the printer.
The Media LED will illuminate when label stock is installed and
detected. It will flash in a specific sequence for error conditions.
See Section 6E for details.
The Unload Button will unload the installed label stock by reversing
it through the printer. Make sure to tear off the printed labels before
pressing the Unload Button. The unload button will allow one press
causing only the amount of labels from the tear off point to back
feed. Back feeding more labels will cause labels to peel off the
backing and get stuck inside the printer.
The Label Tear Bar is a serrated edge for conveniently tearing your
finished labels from the printer. The printer comes with a white tear
bar guard. For smoother label feeding, leave the guard in place
during printing. When you are ready to tear off a label, remove the
guard, tear off the label and replace it.
Unload Button
Pause Button
Pause LED
Power LED
Load/Feed
Button
Media LED
Label Tear Bar
Top Cover
