Label Stock
9
Label Width
Liner Width
TOF Sensor Path
(fixed at 1”)
Width of Thru-Hole
Black Mark
Width
Gap Between
Labels
Label Height
Distance from
Edge of Liner
Label Sensing Methods
Method 1
: Label
Gap Sensing
Method 2
: Thru-Hole
Sensing
Method 3
: Reflective Sensing
(Black mark must be printed on
back side of label stock.)
Note: See table below for Max and Min values in inches and mm.
Distance from
edge of Liner
to edge of Label
Label widths smaller
than 1.5” will need to
be justified on the liner
to trigger both the
infeed and TOF sensor.
Infeed Sensor Path
(factory set at 1.4”)
