Important Safety Information 1
Section 1: Important Safety Information
Thank you for purchasing the LP130e Laser Marking System. Please read the
following important safety information before operating your LP130e.
CLASS 1 LASER PRODUCT
IEC 60825-1 Second Edition, 2007/03
WARNINGS
• Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
• Do not attempt to operate the LP130e with the Top Cover open. To prevent injury,
the internal laser will switch off as soon as the Top Cover is opened.
• Do not attempt to defeat the cover sensor which triggers the automatic switch off
of the internal laser. Serious eye injury can occur.
• Do not modify the LP130e in any way or operate the printer with any damaged
components, including the Safety Skirt.
• Do not attempt to clean any of the Laser Windows while the power is turned on.
• Do not attempt to print to smoke or smokeless label stock without the exhaust
system in place.
• Do not attempt to print without the DF-30e Filtration System when using label
stock which requires the use of the DF-30e Filtration System. Hazardous smoke
and fumes will be released.
• When using the DF-30e Filtration System make sure the feet on the LP130e are
resting inside the indentations on the top of the DF-30e.
• When replacing the exhaust system, switch off power to the unit.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture. To
reduce the risk of electric shock, do not remove exterior panels. No user-
serviceable parts are inside. Refer to qualified service personnel.
• Operate the unit with only proper electrical specifications as labeled on the unit
and the AC adapter.
• There should be no exposed adhesive on the liner of die-cut labels. It will cause
labels to stick to each other and cause adhesive build-up along the printer path
inside the printer. This adhesive can not easily be cleaned without disassembling
the printer.
