P r i m a L u c e L a b i S r l
E AG L E 3 U s e r M a n u a l
In order to use the EAGLE with this configuration, insert 2 M6x12 screws (
a
) in each PLUS ring (2 screws for each ring) and
so fix the EAGLE. If you want to use a guide scope in parallel, you can install the PLUS guide rings. In order to do this,
screw 2 M5x12 screws for each guide ring in the upper part of EAGLE (
b
).
Connecting to telescopes provided with PLUS support rings and support rings spaced more than 12cm.
If you want to use EAGLE with telescopes equipped with rings PLUS spaced more than 12cm (like AIRY APO120,
APO130T, AIRY APO150T and NEWTON CF), you can place EAGLE over to the support ring for supporting a compact guide
scope in parallel. But to do so you first need to add a PLUS Vixen or Losmandy dovetail bar above PLUS support rings and
then secure EAGLE image 19) .
In order to use the EAGLE with this configuration, place a PLUS Vixen or Losmandy dovetail bar (with the same length as
the one placed under the support rings) and fix it with two M6x12 screws (
c
) for each ring. The dovetail bar above the te-
lescope must be fixed in inverted position with respect to the one placed below the optical tube. Then use 4 M6x12
screws (
d
) to fix the EAGLE to the dovetail bar. Finally if you want to use a guide scope in parallel , you can install the PLUS
guide rings. In order to do this, screw 2 M5x12 screws for each guide ring in the upper part of EAGLE (
e
) .
p a g e
!
2 0
Image 19: installing the EAGLE when the main telescope support rings are spaced more than 12cm
c
d
e
