Precor Experience 800 EFX, Getting Started Manual

Page: 15 / 34

13
To attach the cup holder:
1. Position the cup holder on top of the lower shelf, making sure to catch the
bottom latch in the shelf component (see Figure 14).
Figure 14
2. Position your hands on the arrows and press down at the top of the panel.
To complete the installation:
1. Position the badge plate on the front cover and press into place (see Figure 15).
Figure 15
2. Wrap the rubber gasket on top of the badge plate from the back of the display
mount so the split is pointed toward the front. Press down to snap in two tabs at
the back, then walk your hands around wiggling and aligning the remaining tabs
as you go.
3. Refer to the corresponding Console Installation Guide found (in the console box)
to attach your console.
4. Plug in the power cord.