10
To install lower panel and front cover:
1.
Position the cover plate into the center opening of the lower panel.
2.
Install the coax coupler, star washer, and nut, into the jack plate on the lower panel and tighten (
see
Figure 7).
3. Connect the coax cable to the inside end of the coax coupler
. Tighten the connector using a 7/16-inch open-end wrench.
Note
Check the bend radius (about 6 inches) on the coax cable so that it is at a natural angle.
4. Attach the Ethernet coupler
into the jack plate on the lower panel (
see
Figure 7) and plug the Ethernet cable into the coupler.
Figure 7
5. Attach the lower panel using two screws, routing the power cable through designated far right slot. Fully tighten fasteners on the panel.
Figures 8 and 9
Summary of Contents for Experience 800 EFX
