5.17 Elliptical Fitness Crosstrainer
Page 59
Diagram 6.15 - Eddy Current Magnet Assembly
10. Remove the two screws that retain the magnet assembly. Slide the magnet assembly off of
the extension shaft follower.
11. If necessary, adjust the position of the extension shaft follower on the extension shaft so
that the distance from the edge of the follower to the end of the shaft is 1-5/16 inches (See
Diagram 6.16).
Diagram 6.16 - Follower Positioning
12. Slide the replacement magnet assembly onto the extension shaft follower and set the
magnet assembly in it’s mounting position. Replace the magnet assembly mounting screws
removed in step 10.
Shield
Target Disk
Lower PCA
Lower PCA
Mounting Bracket
Magnet Assembly
Gear Motor Extension Shaft
Gear Motor
Home Switch
Extension Shaft Follower
1-5/16”
Extension Shaft Follower
Extension Shaft
