5.17 Elliptical Fitness Crosstrainer
Page 63
Procedure 6.20
- Replacing a Wheel, Wheel Axle or Wheel Bearings
Procedure
1.
Set the on/off switch in the “off” position and disconnect the power adapter from the EFX.
WARNING
Before continuing with this procedure, review the Warning and Caution statements listed in
Section One, Things You Should Know.
2.
Remove the screws from the wheel axle. If when removing the second wheel axle screw,
the axle rotates and the screw does not unthread, insert a 5/32” allen wrench into the end of
the axle from which the screw has been removed. The allen wrench will hold the axle while
you remove the remaining screw. Remove the wheel assembly from the stairarm.
Diagram 6.18- Wheel Assembly
3.
Thread one of the axles screws a few turns into one end of the axle. Hold the wheel
assembly, with the axle screw downward, over a solid surface. Press the axle screw firmly
against the solid surface until the opposite bearing is pressed out of the wheel assembly.
Remove the axle screw from the axle and then remove the axle from the wheel. Insert a
blunt object, such as a screwdriver handle, into the wheel and press the remaining bearing
out of the wheel (See Diagram 6.19).
Stairarm
Axle Screw
Wheel
Axle Screw
