5.17 Ellipitical Fitness Crosstrainer
Page 34
Procedure 6.4 - Replacing the Lower PCA
Removing the Lower PCA
1.
Set the on/off switch in the “off” position.
WARNING
Before continuing with this procedure, review the Warning and Caution statements listed in
Section One, Things You Should Know.
2.
Remove the rear cover as described in Procedure 6.1.
3.
Attach an anti-static wrist strap to your arm, then connect the ground lead of the wrist strap
to the EFX frame.
4.
Remove the shield from the lower PCA.
5.
Disconnect the cables from the lower PCA (See Diagram 6.5).
6.
Remove the screws that secure the lower PCA.
Diagram 6.5 - Lower PCA.
Replacing the Lower PCA
7.
Position the replacement lower PCA at its mounting position.
J8 Connector
J6 Connector
J2 Connector
J1 Connector
J4 Connector
J5 Connector
Interconnect Cable
Speed Sensor Cable
+ DC Input
- DC Input
Motor Cable
Lift Motor Cable