955692_2
12
Step 5:
Connect the 725155 Speed Harness to the 8-pin
Deutsch connector on the DBM. This will provide
you with two 4-pin round connections. The male pin
connector will connect to the GPS adapter, while the
female pin connector will connect to a Radar adapter
(not used for YieldSense). If the installation requires
routing a GPS adapter outside of the cab, connect the
725155 GPS connection to the Cab Harness to use the
external GPS connection.
Step 6:
Connect the OEM CAN harness to the 6–pin Deutsch
connector on the DBM. (if applicable) Route the
OEM CAN connection to the CAN port. Refer to the
specific combine model’s installation manual for
further details on the specific location of the CAN
port.