Model PD6262 Analog Dual-Input Rate/Totalizer Instruction Manual
89
Function Keys Operation
During operation, the programmable function keys operate according to
the way they have been programmed in the
Advanced Features – User
menu.
The table above shows the factory default settings for F1, F2, and F3.
F4 Operation
A digital input, F4, is standard on the meter. This digital input is
programmed identically to function keys F1, F2, and F3. The input is
triggered with a contact closure to COM, or with an active low signal.
During operation, F4 operates according to the way is has been
programmed in the
Advanced Features – User
menu.
Maximum/Minimum Readings
The max & min readings (peak & valley) reached by the process can be
displayed either continuously or momentary:
1. Display briefly by assigning to the F1-F3 function keys or to the
digital inputs in the
User
menu.
2. Display continuously by assigning either display to max/min
through the
Display
menu.
Any of the F1-F3 function keys (buttons) and the digital inputs can be
programmed to reset the max & min readings. The meters are set at the
factory to display the max/min reading by pressing the Up arrow/F2
button and to use the Right arrow/F1 button to reset the max/min.
To display max and min channel A reading using function key with
factory defaults:
1. Press Up arrow/F2 button to display minimum reading of channel A
since the last reset/power-up. The display will then display the
maximum reading of channel A since the last reset/power-up.
2. To reset max/min press Right arrow/F1 button. The max & min
displays are reset to actual values.
3. Press Menu to exit max/min display reading.
