Model PD6262 Analog Dual-Input Rate/Totalizer Instruction Manual
67
Reset Menu (
reset
)
The
Reset
menu is used to reset the maximum (peak) value of
Ch-A and Ch-B rate (
rst Hi
), minimum (valley) reading of Ch-A and
Ch-B rate (
rst Lo
), both high and low value of Ch-A and Ch-B rate
(
rst HL
), Ch-A total (
tot A
) or Ch-B total (
tot B
), Ch-A grand total
(
Gtot A
) or Ch-B grand total (
Gtot B
), both Ch-A and Ch-B totals
(
tot AB
), or both Ch-A and Ch-B grand totals (
Gt AB
).
Control Menu (
Contrl
)
The
Control
menu is used to control the 4-20 mA analog output (Aout 1
only) and the relays manually, ignoring the input. Each relay and analog
output can be programmed independently for manual control. Selecting
automatic control sets all relays and analog output for automatic
operation.
Once Manual mode is initiated on any relay or
analog output, an LED labeled “M” is turned
on. Every few seconds, all LEDs representing
outputs that are in Manual mode, as well as
the “M” LED flash.
This process will continue
as long as any output is in manual mode.
Setting Up the Password (
pass
)
The
Password
menu is used for programming three levels of security to
prevent unauthorized changes to the programmed parameter settings,
to restrict the ability to reset the totals and grand totals, and to program
the non-resettable totalizer.
Pass 1: Allows use of function keys and digital inputs
Pass 2: Allows use of function keys, digital inputs and editing set/reset points
Pass 3: Restricts all programming, function keys, and digital inputs.
Total: Prevents resetting the total manually
Gtotal: Prevents resetting the grand total manually
