Model PD6262 Analog Dual-Input Rate/Totalizer Instruction Manual
33
Set 1
Set 1
Enter relay 1 set point
RST 1
Reset 1
Enter relay 1 reset point
A-nman
Auto-manual
Set relay for auto or manual reset any time
LatCH
Latching
Set relay for latching operation
Lt-CLr
Latching-cleared
Set relay for latching operation with manual
reset only after alarm condition has cleared
Altern
Alternate
Set relay for pump alternation control
SAmpl
Sample
Set relay for sample time trigger control
Off
Off
Turn relay off
FaiLSF
Fail-safe
Enter
Fail-safe
menu
FLS 1
*
Fail-safe 1
Set relay 1 (*through 8) fail-safe operation
on
On
Enable fail-safe operation
off
Off
Disable fail-safe operation
DeLAY
Delay
Enter relay
Time Delay
menu
DLY 1
*
Delay 1
Enter relay 1 (*through 8) time delay setup
On 1
On 1
Set relay 1 On time delay
OFF 1
Off 1
Set relay 1 Off time delay
break
Loop break
Set relay condition if loop break detected
Break1
*
Break 1
Set relay 1 (*through 8) break condition
ignore
Ignore
Ignore loop break condition
(Processed as a low signal condition)
On
On
Relay goes to alarm condition when loop
break detected
Off
Off
Relay goes to non-alarm condition when
loop break detected
Aout
Analog output
Enter the
Analog output
scaling menu
Aout 1
*
Aout Channel
Analog Output source channel (*1-3)
Dis 1
Display 1
Program display 1 value
Out 1
Output 1
Program output 1 value (e.g. 4.000 mA)
Dis 2
Display 2
Program display 2 value
Out 2
Output 2
Program output 2 value (e.g. 20.000 mA)
