3
4.
When the central is in alarm mode, the remote indication led flashes twice
per second.
5.
the signals „tamper” and „trouble” for each of the zones (for which are possi-
ble depending on the connection method), regardless of the type of zone, are proc-
essed as for 4-hour zone (immediately generates an alarm).
Announcement
.
. the module can operate in the following modes of announcement:
-
sMs
-
GPrs to the monitoring centre
.
at the initial turning on the module can send a call to the first recorded number
depending on the option
GSM Mode Options: Report On/Off to #1
(if possible for
the siM card):
3.
the text of the sent sMs, which is not configurable by the client may be:
AC Power TROUBLE ALARM
AC Power RESTORED
Low Battery TROUBLE ALARM
Low Battery RESTORED
Low Capacitance Battery TROUBLE
or after the text for the relevant zone:
- TAMPER
interrupted zone or activated "tamper"
-TROUBLE
fault zone (zero resistance)
-
DOUBLE
at paired zone
4.
continuous monitoring of the battery voltage: if for 30 minutes in all checking
the voltage is <0.5V, a message is sent for diluted battery "
LOW BATTERY TROU-
BLE ALARM
" and respectively if for 30 minutes in all checking the voltage is
> .5V, a message is sent for the battery recovery „
Low Battery RESTORED
”.
5.
Minutely check the battery capacity by briefly load: if for 30 minutes in all
checking the voltage is <0.5V in the laden condition, a message is sent for low bat-
tery capacity „
Low Capacitance Battery TROUBLE
”.
6.
in case of loss of ac power, upon expiry of the programmed time is generated
the signal „
AC Power TROUBLE ALARM
” and „
AC Power RESTORED
” - after the
restoration of the power supply.
7.
the signals on the state of the battery and the power supply are not sent with
the a call but only with sMs, if permitted for GsM numbers.
8.
the text of sMs-s finally contains the validity of the siM card and the remain-
ing amount (for prepaid cards only), the quality of the GsM signal (the signal level
rssi 0-3 and the ratio of error rate Ber 0-7)q as well as the battery voltage, for
example:
do 31.10.2010, 002.76lv, csq=02/07, batt.=13.8V
