9
User & RFID Codes 2 "c2"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF
User & RFID Codes 3 "c3"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF
User & RFID Codes 4 "c4"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Factory Default: "fd"
Read RAM Data: "rd"
To Main Menu: "mm"
>
0. the codes
Serial Number
and
ID Number
are digital, in hexadecimal for-
mat.
. the two low power output "
Y
" and "
G
" are active only if in
Alarm Codes
Mode
is not active mode rfid.
. the code
Confid Code
can contain any ascii characters, not just num-
bers.
3. after entering from the main menu of
gp
the module sends:
== GSM Parameters:
APN Address: "aa"= internet.vivatel.bg
PDP Address: "pa"= 0.0.0.0
Server TCP/IP-1: "s1"= 192.168.1.51
Server Port-1: "p1"= 8062
Server TCP/IP-2: "s2"= 255.255.255.255
Server Port-2: "p2"= 8061
Module Timeout [x10sec]: "mt"= 60
Server Timeout [x10sec]: "st"= 51
GPRS Code: "gc"= 00 97 97
Test Interval [h]: "ti"= 12
Ack Interval [s]: "ai"= 60
GPRS UserName: "un"=
GPRS PassWord: "pw"=
GSM Number 1: "n1"= 08 77 31 39 99 FF FF FF FF FF FF FF FF FF FF FF
GSM Number 2: "n2"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
GSM Number 3: "n3"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
GSM Number 4: "n4"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
GSM Number 5: "n5"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
GSM Number 6: "n6"= FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Limit Request Number: "ln"= *102#
