7
3. the programming can be carried out as using specialized software for the
purpose, also with a standard terminal (e.g. Hiperterminal).
4. at powering the module after the initial message:
"
GSM Home Alarm Panel Version V.12.01.05 is Ready..
.”
the 5 led level of GsM radio signal go off, the remote led for status "
Status
"
lights and the display shows:
“
Please, enter config keys
...”
5. Within 5 sec. after displaying the message (while the remote led "
Status
")
glows, should be entered
&$
.
6. the display shows all data stored in the memory in the following format:
== Programm Mode:
Alarm Parameters:
"ap"
Codes Parameters:
"cp"
GSM Parameters:
"gp"
Send Whole Memory to RAM:
"sm"
Receive Whole RAM:
"rr"
Receive Whole Flash:
"rf"
Write and Exit:
"go"
Enter Parameters Type ...
>
after which it is expected the introduction of a command "
>
".
7. in between quotation marks are the commands that can be executed by the
correspondingly menu; they are written in small letters. of each byte in command
mode the module returns an echo.
8.
Alarm Parameters, Codes Parameters
and
GSM
Parameters
are the
three menus for programming.
9. after the command
Send Whole Memory to RAM: "sm"
the module re-
sponds with "
=
" and expects from the Pc 560 bytes of data to be recorded in the
raM module.
0. all commands store data into the raM memory of the module. in order to
record them in non-volatile memory, then it is necessary a command "
go
".
. after the commands
Receive Whole RAM: "rr"
and
Receive Whole
Flash: "rf"
the module sends two bytes for the data size (first junior, then senior) and
then the data itself. the data are respectively the contents of raM and non-volatile
memory data flash of the module.
. at wrong command entry it is displayed
Syntax Error !!!
.
3. after exiting the programming mode it is displayed
Work mode entered!
and switches to work mode.
4. at failure to implement a key for about 0 seconds it is displayed
Time-
out ...
and the programming mode is terminated.
5. after entering from the main menu
ap
the module sends:
