8
Step 7:
Attach mounting ears to the side mounting holes of UPS module by using the screws provided and the
ears should face forward as following picture show.
Step 8:
Put the UPS module on the sliders and push it toward connector box. Please make sure hot-swappable
connectors on connector box are firmly plugged into the UPS module. Fasten the UPS module to the
chassis with screws on the mounting ears.
Step 9:
Install the battery pack with the same procedure as UPS module.
2-4. Single UPS Installation
Installation and wiring must be performed in accordance with the local electric laws/regulations and execute the
following instructions by professional personnel.
1)
Make sure the mains wire and breakers in the building are enough for the rated capacity of UPS to avoid the
hazards of electric shock or fire.
NOTE:
Do not use the wall receptacle as the input power source for the UPS, as its rated current is less than the
Connector box
