7
2-3-2. Rack Installation
Please follow below steps to mount UPS/battery pack into 19” rack or rack enclosure.
Step 1:
Insert 8 pieces of fixing nuts into the following locations to fix rail sliders and UPS.
Step 2:
Use 4 pieces of M6 screws to mount rail sliders into front of the chassis.
Step 3:
Adjust the distance of rail sliders by pulling the other end. It should be the same depth of rack chassis. For
example, if depth of rack chassis is 900mm, please pull the length of rail sliders in 900mm. Then, use 2
pieces of M6 screws and 2 pieces of M6 studs to the mount rail sliders into the back of the chassis.
Step 4:
Fixing the slide-bone into the middle of two sliders with 4 pieces of M4 screws. See chart below.
M4 screws
Slide-bone
Step 5:
Disassemble the connector box from UPS by removing 4 screws.
Step 6: Fixing the connector box with slide-bone by 2 pieces of M3 screws. See chart below.
