32
Battery fail
The UPS detects bad battery or battery
disconnected
Overload
Some unnecessary loads should be cut off to
reduce the load.
Fault mode
Some fatal problems happened.
Parallel mode
UPS is working in parallel mode
5.3
Display functions
Use the two middle buttons ( and ) to scroll through the menu structure. Press
the Enter ( ) button to select an option. Press the ESC (
) button to cancel or
return to the previous menu.
When starting the UPS, the display is in the default UPS status summary screen.
Main menu
Submenu
Display information or Menu function
UPS status
UPS mode, IoT status, date/time, battery status
，
parallel information and current alarms
Event log
Displays the events and faults stored
Measurements
[Load] W VA A P%, [Input L1/Output] V Hz, [Input
L2/Input L3] V Hz(if they exist),
[Battery] % min V EBM, [DC Bus] V, [Temperature]
℃
Control
Load segment
Load segment enable or disable
Start battery test
(single mode)
Single battery test (parallel
mode)
Starts a manual battery test in stand-alone mode
Or starts a single battery test in parallel mode
Parallel UPS battery test
(parallel mode)
Starts a manual battery test in parallel mode
Single UPS turn off
(parallel mode)
Operate this machine to exit parallel connection
Reset fault state
Clear active fault
Reset event list
Clear events and faults
Reset com card / Reset IoT Reset IoT and Modbus TCP function inside UPS
Restore factory settings
Restore to default factory settings
Settings
Refer to User settings
