Nautilus Hi-Dump Rider Scrubber/Sweeper #988752UM Rev. * 03/16
© 2014-2015 Minuteman International, Inc.
Page 77
PREVENTATIVE MAINTENANCE
W/d,
:h^dDEdEhd
Leveling the Rear Squeegee
Leveling the squeegee assembly provides a uniform fl are of
the squeegee blade. It is important that this adjustment be
performed on an even, level surface.
1. Lower the squeegee.
2. Drive the machine forward approximately 2 ft (0,6 m).
3. Set the parking brake.
4. Examine the curl in the squeegee rubber around the
entire back edge of the squeegee blade.
If the fl air is not even across the rear squeegee blade
proceed with the following:
5. Locate the pitch adjustment nut.
6. To lower the front of the squeegee turn the pitch
adjustment nut counter-clockwise.
To lower the rear of the squeegee turn the pitch
adjustment nut clockwise.
7. If necessary proceed to
Adjusting the Rear Squeegee
Blade Flare.
8. Test the squeegee for water pick up.
9. Re-adjust to level the squeegee if necessary.
