© 2014-2015 Minuteman International, Inc.
Nautilus Hi-Dump Rider Scrubber/Sweeper #988752UM Rev. * 03/16
Page 46
LP TANK
SERVICE
VALVE
Fig. 1: LP tank, service area
MACHINE OPERATION
DRIVING
The direction control pedal moves the machine forward and
backward. To move the machine forward or backward, fi rst
release the parking brake.
• To move Forward: Apply pressure to the front of
the directional control pedal, increasing pressure to
increase speed.
• To move Backwards: Apply pressure to the rear of
the directional control pedal, increasing pressure to
increase speed.
SLOWING AND STOPPING
Allow the directional control pedal to move into neutral. Step
on the brake pedal.
INCLINES OR SLIPPERY SURFACES
Always travel slowly when operating on inclines or slippery
surfaces.
WARNING
Do not travel across or turn on inclines, to maintain
stability of the machine.
Always travel straight up or down on inclines.
STOP THE MACHINE
1. Stop scrubbing and drive the machine forward until the
rear squeegee raises.
2. Stop the vehicle using the foot brake.
3. Push the engine throttle switch to idle.
4. Turn off the ignition key switch to the off position.
5. Remove the key.
6. Set the parking brake.
7. On LP powered machines turn the LP tank service valve
OFF. To turn valve OFF, turn the valve clockwise until it
stops. The valve is located on the LP tank. (See Fig. 1)