Nautilus Hi-Dump Rider Scrubber/Sweeper #988752UM Rev. * 03/16
© 2014-2015 Minuteman International, Inc.
Page 89
Fig. 1
Fig. 2
LOCKING
ARM
PREVENTATIVE MAINTENANCE
COVERS
Many of the covers are removable to provide increased
access for inspection or maintenance.
The top cover is removable by sliding the cover toward the
left side of the machine.
The left side door is removable by lifting the door upwards.
The front cover is removable by fi rst releasing the quick-
disconnect at the frame end of the retaining cable then
sliding the cover to toward the left side of the machine.
Seat Mount Adjustment:
The seat mount is opened by pulling on the latch handle
protruding out from the front of the seat mount then lifting the
back of the seat mount.
The seat mount will lock in the raised position. To unlock the
seat mount lift the seat mount lock arm and lower the seat
mount.
The seat mount can be removed by fi rst disconnecting the
lock arm from the frame pin and then rotating the two seat
mount hinge retaining bars toward the front of the machine.
The seat mount can then be lifted off .
To reinstall the seat mount set the seat mount into the hinge
receivers, reconnect the lock arm, and lower the seat mount.
The seat mount retaining bars will latch automatically.
The left wall cover of the operator compartment can be
removed by taking out the four attachment screws.