Nautilus Hi-Dump Rider Scrubber/Sweeper #988752UM Rev. * 03/16
© 2014-2015 Minuteman International, Inc.
Page 81
PREVENTATIVE MAINTENANCE
Fig. 3: Retaining Strap & Blade
RETAINING
STRAP
LATCH
BLADE
SIDE SCRUB BRUSH SQUEEGEE (OPTION)
The side scrub brush squeegee channels water to the inside
of the right side squeegee and into the path of the rear
squeegee.
Replace the side scrub brush squeegee if it becomes worn,
damaged, or loses its shape.
Replacing Side Scrub Brush Squeegee Blade
1. Open the latch on the squeegee retaining strap and
remove the retaining strap. (See Fig. 3)
2. Replace the squeegee blade by placing the appropriate
set of holes on the squeegee blade onto the pins of the
side squeegee frame.
When the side scrub brush is new: Use the upper set of
holes.
When the brush is moderately worn: Use the center set of
holes.
When the brush is very worn: Use the lower set of holes.
Note:
Position the beveled edge of the squeegee blade
down and toward the front the machine.
3. Replace the squeegee retainer strap by fi rst hooking the
separate straps around the notches at the front and rear
edge of the squeegee frame.
4. Close the latch on the side squeegee retaining strap.
