© 2014-2015 Minuteman International, Inc.
Nautilus Hi-Dump Rider Scrubber/Sweeper #988752UM Rev. * 03/16
Page 32
MACHINE OPERATION
LPG TANK
SERVICE
VALVE
Fig. 1: LPG Tank - Location of Service Valve
Fig. 2: Control Settings, before “One-Touch” selection
SQUEEGEE
SWITCH
“ON”
ONE-
TOUCH
SWITCH
SCRUB
BRUSH
SWITCH
“ON”
SCRUB
BRUSH
FORCE
LOWEST
SETTING
SOLUTION
FLOW
LOWEST
SETTING
CHEMICAL
METERING
SWITCH “ON”
NORMAL SCRUBBING
This machine is equipped with one button
scrubbing. It is not necessary to press all of the
scrub function switches each time you begin
scrubbing.
1. On LPG powered machines; Open the liquid service
valve (turn valve counter-clockwise) on the LPG
tank (See Fig. 1).
2. Start the engine.
3. Ensure that the squeegee and brush switches (to the
right of the green one-touch switch) are in the “on”
position. Set the brush pressure switch to the lowest
setting required for the scrubbing application. Set the
solution control knob to the low fl ow position. (See Fig. 2)
If the machine is equipped with chemical metering
ensure that the chemical metering switch is in the “on”
position.
