manualshive.com logo in svg

PowerBoss Nautilus CE PB45HDSLCE, User Manual, Page: 12 / 102

Share
Download
PowerBoss Nautilus CE PB45HDSLCE User Manual Download Page 12

 © 2014-2015 Minuteman International, Inc.

Nautilus Hi-Dump Rider Scrubber/Sweeper  #988752UM  Rev. * 03/16

Page  12

FEATURES

FEATURES

AIR-MOVING SYSTEM

•  Internal sound insulation on vacuum impeller

ERGONOMICS SYSTEM

•  Roomy, open operator compartment for extra comfort
•  Toe operated parking brake
•  Adjustable, high-back seat
•  Power steering and tilt steering wheel
•  Unparalleled maintenance accessibility, hinged sides 

and covers require no tools.

HYDRAULIC SYSTEM

•  Protection for both auxiliary and propulsion pumps 

using separate 100 mesh suction strainer

•  Hydraulic reservoir equipped with site gauge and dip 

stick for fl uid level check and replacement

•  Hydraulic fi lter equipped with color coded pressure 

gauge to indicate fi lter replacement

MULTI-LEVEL HOPPER DUMP SYSTEM

•  Debris hopper can be emptied from ground level up to 

60” height.

•  No need to hand dump debris hopper

DRIVE-TRAIN SYSTEM

•  Industrial liquid-cooled engine
•  Heavy-duty radiator & Tri-phase air cleaner
•  Hydraulics protection package
•  4-Core Radiator

CHASSIS SYSTEM

•  Massive One-Piece, unitized 7ga, 0.188 in (0,48 cm) 

thick steel frame

•  Soft-ride tires

ENVIRONMENTAL FRIENDLY FEATURES

LOWER EMISSIONS

All gas and LP engines meet EPA and CARB specifi cations 
and have catalyst muffl  ers.  Diesel operation is available, 
bio-diesel fuel can be used in Kubota engines.

Summary of Contents for Nautilus CE PB45HDSLCE







































































































Reviews:

No comments