PowerBoozt LfeLi-48100TB, User Manual

Page: 19 / 192

V1.01
19
carefully!! There are two terminal blocks with "IN" and "OUT" markings. DO NOT misconnect the
input and output connectors .
warning! All wiring must be done by qualified personnel.
warning! It's very important for system safety and efficient operation to use appropriate cable for AC
input connection. To reduce risk of injury, please use the proper recommended cable size as below
Suggested AC Power Cables:
MODEL TYPE Koppel
PB.UPS.2K24 14AWG 0.8 – 1.0Nm
PB.UPS.3K24 10AWG 1,2 – 1,6Nm
PB.UPS.5K48 8AWG 1,4 – 1,6Nm
Follow the steps below to implement ac input/output connection:
1. Before making ac input/output connection, please open the DC protector or decoupler first.
2. Remove insulation sleeve 10mm for six conductors. And shorten phase L and neutral conductor N
3mm.
3. Route ac input cables according to the polarities marked on the terminal block and tighten the
terminal screws. Make sure to connect the PE protective conductor first.
Ground (yellow green)
L Line (brown or black)
N Neutral (blue)
warning:
Make sure the AC power source is disconnected before attempting to wire it to the
device.
4 . Then position AC outlet according to the polarities marked on the terminal block and tighten the
terminal screws.
Be sure to connect the PE protective conductor first.