PowerBoozt LfeLi-48100TB, User Manual

Page: 122 / 192

V1.01
122
Switch power settings
After inserting the batteries, check whether there is a short circuit.
If not, the power can be turned on.
The parameters of the switching power supply should be set according to the table below:
Item Parameters
Floating charging voltage 51.00V ~ 51.75V
Uniform charging voltage 52.50V ~ 54.00V
After the parameters are set, the module can be used.
Before parallel installation, set the battery to limited charge mode. Please refer to for detailed
operations the software manual.
To ensure the longest possible life of the lithium-ion battery pack, the modules are properly and
regularly maintained and inspected.
Maintenance records must be kept thoroughly and accurately so that the control parameters of the
batteries can be easily checked.
Electrical maintenance
The table below lists the check points, the method of detection, the indications that repair is required
and the actions to be taken during maintenance.