Assembly
17
• Once you have selected the appropriate seat position
and inserted the seat tabs into the slots in the vehicle
body, align the holes in the back of the seat with the
holes in the vehicle body.
• Insert three #8 x
3
/
4
" screws through the holes in the
seat and into the vehicle body. Tighten the screws
using a Phillips screwdriver. Do not over-tighten.
Vehicle
Body
Seat
• Fit the gas cap into the hole in the side of the
vehicle body.
Gas Cap
Note:
The seat can be assembled in either of two
positions for your child's comfort.
• Position the seat upright.
• Fit the three tabs on the front of the seat into either the
1st or 2nd set of square openings in the vehicle body.
Seat your child in the vehicle and check your child's foot
to pedal distance and adjust the position of the seat, if
necessary. Reposition the seat, if necessary.
2nd
Position
1st Position
Seat
27
28
29
• Insert and
“snap”
the ends of the roll bar into the holes
in the back end of the truck.
Hint:
This may require a lot of force.
Roll bar
30
75597pr-0920.qrk 8/1/01 4:56 PM Page 17
