Assembly
16
• Insert the fastener end of a long seat belt strap through
a slot in the center of the seat. Make sure that the
fastener faces the outer edge of the seat.
• Pull the long seat belt strap completely through the
slot until the T-loop at the opposite end of the belt
catches against the slot. (You will pull one T-loop
through the slot.)
• Repeat this procedure to assemble the other long seat
belt strap to the seat.
Long Seat
Belt Strap
Fastener
Slots
End T-Loop
26
Cab
Hole
Antenna
• Fit the tapered end of the antenna into the hole in the
front of the cab.
• Press firmly to snap the antenna into the hole.
End T-Loop
Seat
Short Seat
Belt Strap
Fastener
• Position the seat upside down.
• Insert the fastener end of a short seat belt strap through
one of the the slots near the outer edge of the seat.
Make sure the side of the seat belt with the fastener
faces the outer edge of the seat.
• Pull the short seat belt strap completely through the slot
until the end T-loop at the opposite end of the belt
catches against the slot. (You will pull one T-loop through
the slot.)
• Repeat this procedure to assemble the other short seat
belt strap to the seat.
Battery
Compartment
Holes
Round Snaps
Hood
• Lower the hood, making sure to align the round snaps
on the underside of the hood with the holes near the
battery compartment.
• Press firmly on the top of the hood above each snap
to fasten the hood. (To open the hood, please see the
instructions on page 23, step 1.)
23
25
24
75597pr-0920.qrk 8/1/01 4:56 PM Page 16
