Assembly
12
Large Tab
• Position the knob plate with the large tab down.
• Fit the large tab on the knob plate into the bottom of the
opening on the dash, as shown.
• Press near the top of the knob plate to
“snap”
it into
the dash.
• Fit the knobs into the holes in the knob plate and press
firmly to
“snap”
them into the dash.
Knobs
Knob Plate
• Press firmly above each of the front tabs to snap them
into the slots in the vehicle body.
IMPORTANT! Check each front, side and rear tab to
make sure the tabs are properly secured in the slots
in the vehicle body.
PRESS DOWN HERE
To Snap Front Tabs
Dash View
9
10
• Press firmly above one of the rear tabs to snap it into the
slot in the vehicle body.
IMPORTANT!
While snapping the rear tab into the slot,
push on the side of the cab to prevent it from bowing. Make
sure the cab side tabs stay aligned in the vehicle slots.
PRESS DOWN HERE
To Snap Rear Tab
PUSH
HERE
To Keep
in Place
• Press down above the cab side tabs while pulling up on
the front wheel well to snap the side tabs into the slots.
• Repeat steps 7 and 8 to snap the rear and side tabs
on the other side of the cab into the slots in the
vehicle body.
PRESS
DOWN HERE
To Snap
Side Tabs
PULL UP
8
7
75597pr-0920.qrk 8/1/01 4:56 PM Page 12
