Assembly
Large Hole
in Dash
Steering
Column
• Fit the end of the steering column out through the large
hole in the dash.
Top Cab View
13
Steering
Column
Lower
Steering
Linkage
Upper
Steering
Linkage
Rectangular
Openings
• Position the vehicle body on its side.
• From the underside of the vehicle body, fit the straight
end of the steering column between the upper and
lower steering linkages and through the rectangular
openings in the front axle assembly and vehicle body.
• Continue to slide the steering column into the passenger
compartment.
Bottom View
13
14
• Bend the plastic tip of the microphone cord so that it
forms a "T".
• Fit the plastic tip at the end of the microphone cord
through the small oval hole in the dash. Pull up gently
on the microphone cord to make sure the plastic tip is
secure under the dash.
• Fit the microphone to the dash.
• Fit the key assembly into the hole below the knob plate
and press firmly to
“snap”
it into the dash.
Microphone Cord
Plastic Tip
Key
Assembly
90
80
70
60
50
40
30
20
10
0
MPH
6
5
3
2
1
0
RPM
P R N D 2 1
4
X1000
TEMP
FUEL
TONE
• Before applying labels to the dash, wipe the dash with a
clean, dry cloth to make sure it is free of dirt and oils.
Make sure your hands are clean and dry.
• Apply labels as shown. For best results, avoid reposition-
ing a label once it has been applied.
35
41
20
37
11
38
33
Dash View
Dash View
12
21
11
12
75597pr-0920.qrk 8/1/01 4:56 PM Page 13
