Tab
Assembly
• Make sure the three holes in the running board are
aligned with the three holes in the vehicle body and the
flat side of the running board tab contacts the underside
of the vehicle body (see inset).
• Insert three #8 x
3
/
4
" screws through the holes in the
vehicle body and into the running board. Tighten the
screws using a Phillips screwdriver. Do not over-tighten.
• Repeat assembly step 1 and 2 to assemble the other
running board to the other side of the vehicle.
• Bend the tab on a running board
down
(see inset).
• While holding the tab in place, fit the running board
under the side edge of the vehicle body.
Hint:
You may need to pull gently on the side of the
vehicle body to fit the running board in place.
Vehicle Body
Running
Board
Running Board
Running Board
Tab
Bottom View
F
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle’s unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
WARNING
10
IMPORTANT!
Some of the decorative labels need to
be applied to the truck during a specific assembly step.
Please read and follow each step of assembly in
sequence.
Running Board
1
2
• Insert two #8 - 18 x 1
3
/
4
" screws through the holes in the
front bumper and into the vehicle body. Tighten the
screws using a Phillips screwdriver. Do not over-tighten.
3
75597pr-0920.qrk 8/1/01 4:56 PM Page 10
