Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 81 / 170

Maintenance and Troubleshooting 13-3
Document number: 037043.fm
Revision: B
Maintenance and Troubleshooting
z
Check the equipment that is connected to the blown breaker (there may be a reason for this breaker
to blow) and reconnect it.
Battery failure:
z
Check the batteries.
z
Check the "battery test" parameters in controller / Powcom.
Module failure:
z
Localise the module.
z
Pull it out.
z
Wait for 30 sec. and reinstall it according to 13.1 Installing new modules .
Battery temp alarm:
z
Check the batteries.
z
Check ventilation.
z
Check reading in controller / Powcom.
Symmetry fault:
z
Reset the alarm.
z
Check connections according to number of batteries in controller / Powcom.
z
Check batteries.
Battery breaker failure:
z
Localise the breaker.
z
Check the batteries.
z
Reconnect the breaker.
High load:
z
Check load situation according to capacity of the system.
z
Increase number of modules.
Urgent module failure:
z
See "Module failure".
Communication failure:
z
Check if there is a module in current position.
z
See "module failure".
Temp probe failure:
z
Check connection on temp probe.
z
Replace temp probe.
Alarms are blocked (only with LCD display):
z
Check " miscellaneous" menu in controller.