manualshive.com logo in svg

Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 30 / 170

Share
Download
Power One PODS 16.48-16000 1940 HEX Instruction Manual Download Page 30

6-4

PODS 16.48-16000 1940 HEX

Document number: 039160.fm

Revision: A

Installation guide

6.2.3 Cabinet mounting

The cabinet base needs to be fastened to the ground before lifting the cabinet into position. 

WARNING! THE CABINET IS HEAVY AND MUST BE HANDLED WITH DUE CARE

1. Step 1 in 

Figure 6-1

 shows the location of the mounting holes for the base. M12 bolts are not 

delivered with the cabinet and should be supplied by the customer. 

2. Plinth directions: The sides of the plinth have a 

SIDE 

imprint. The 

SIDE

 imprint should face up from 

the ground. Measurements of the plinth needed to prepare the site for mounting can be found in 

Appendix A: Drawings

.

3. After secure fastening of the cabinet base, lift the cabinet into position on the cabinet base (Step 2 in 

Figure 6-1

). 

4. Step 3 in 

Figure 6-1

 shows location of mounting holes for fastening the cabinet to the cabinet base. 

Fasten the cabinet to the base with M10 bolts from inside the cabinet. M10 bolts are included.

Summary of Contents for PODS 16.48-16000 1940 HEX











































































































































































Reviews:

No comments