Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 126 / 170

F-8 PODS 16.48-16000 1940 HEX
Document number: 039249.fm
Revision: B
Battery Extension Kit - Installation Procedure
F.5 Installation and Connection
F.5.1 Installing the Battery Shelf
WARNING! THE TWO FRONT PLATES ARE MOUNTED FOR CABINET STABILITY. IF THESE
HAVE TO BE REMOVED DURING INSTALLATION, DO NOT REMOVE BOTH PLATES AT THE
SAME TIME.
Note! Front plate removal is only necessary when installing battery extension kit 4. However, removal of
the lower plate is recommended for easy access when installing batteries in the lower shelf.
Mount the battery shelf by sliding it into the punch outs on the back walls. The spacing between two battery
shelves should be 8U. This is measured from the mounting hole of the lower shelf to the mounting hole on
the shelf above. The shelves in
Figure F-2 are shown transparent so that the mounting holes are visible.
Figure F-2 Additional Battery shelves
1
2
3
4
5
6
7
8
1