Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 53 / 170

Operation / Product description PCS 2 8-7
Document number: 036777.fm
Revision: B
Operation / Product description PCS 2
z
High temperature limit.
Change these limits using the arrow keys and RETURN to select. See Appendix B, Configuration for
default settings.
Boost parameters.
This menu contains the limits for boost charging control. See section "Boost charging" for more information.
Battery test.
This menu contains the limits for battery test. See section "Battery test" for more information.
Temperature comp.
This menu turn the temperature compensation on and off, and is used to set the compensation factor.
System specific limits
Only available for specific systems. For more information see Appendix B, Configuration
Batt. Cur. Limit.
This menu is used to toggle the battery current limiting on and off, and to set the current limit.
Dist. Current limits
This menu is used to toggle each distribution high current alarm limit on and off, and to set the current limit.
Note! Current limiting is not available on all systems.
8.4.1.7 Miscellaneous
The miscellaneous menu is used to set the date and time, change password, view version information,
initialize modem, show symmetry voltages and temperature.
Set time
The clock is shown. Press RETURN to adjust the clock. The clock has a battery back-up and will keep the
time even if the PCS 2 is turned off.
Relay test
Press RETURN to check the alarm relays. Use the arrow keys to select the relay to be activated.
Alarm blocking
Use Alarm Blocking to disable the relays during service. One alarm relay will normally be active as long as
the alarms are blocked.
Version
Show the PCS 2 software version, configuration number and serial number.
Set new password
Choose "set new password" from the "miscellaneous" menu. Press RETURN, enter the old password and
press RETURN. Enter the new password and confirm by pressing RETURN. To avoid mistyping the new
password has to be entered once more. Confirm by pressing RETURN.
Note! Be sure to note the new password. If the password is not known or access is denied, contact
Power-One technical support for assistance
Shunt A
Displays the current rating of the battery shunt. I.e. this parameter shows the value of current in the current/
voltage ratio of the shunt.