Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 160 / 170

I-8 PODS 16.48-16000 1940 HEX
Document number: 039448.fm
Revision: B
Battery Heater Kit - Installation procedure
Figure I-3 Alternative Cable Path
7. Remove the end stop piece mounted on the DIN rail below the mains terminal blocks.
Note! If a Surge arrestor kit is installed or is being installed, mount the battery heater circuit breakers
and ground terminal block below the surge arrestor as shown in Figure I-4 .
8. Mount the circuit breaker and the ground terminal block by snapping them on the DIN rail below the
mains input terminal blocks or below the surge arrestor kit if installed (Torque: 1,5 Nm). Mount the end stop
below the kit in order to prevent the parts from sliding on the DIN rail (Torque: 1,5 Nm)..