manualshive.com logo in svg

Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 21 / 170

Share
Download
Power One PODS 16.48-16000 1940 HEX Instruction Manual Download Page 21

System description PODS 16.48-16000 1940 HEX

4-9

Document number: 039159.fm
Revision: B

System description PODS 16.48-16000 1940 HEX

4.4.6 BTS Breaker 50A 3-pole (Option)

The BTS Breaker 50A 3-pole is an optional kit that allows extension of one extra load breaker. This breaker 
can be mounted with 50A, 100A or 150A load capacity.

See: 

Appendix D: BTS Breaker 50A 3-pole - Installation procedure

4.4.7 Surge arrestor kit, 3-phase (VAL-CP-3S-350/3+1) (Option)

The surge arrestor kit is an optional unit that protects the system against lightning and transient 
overvoltage. Each surge arrestor kit consists of three over voltage protector units, a spark gap plugged in 
one holder and link cables.

Each surge arrestor unit has a display on the front that indicates if it is OK or has blown. Surge arrestor 
units with a red display have blown and must be replaced. When fitted, each surge arrestor kit is located 
below the mains input terminal blocks.

See:

 

Appendix E: Surge arrestor kit, 3-phase (VAL-CP-3S-350/3+1) - Installation procedure

4.4.8 FMP 16 Dummy Module (Option)

The FMP 16 dummy module is an optional kit for covering empty module positions.

See: 

Appendix G: FMP 16 Dummy Module - Installation procedure

4.4.9 Battery extension kit (Option)

The battery extension is an optional kit that allows additional battery branches to be added to the power 
system (extension of hold up time). The power system allows maximum 4 battery branches. The kit 
includes one extra single pole battery breaker, battery shelf, battery cable, symmetry cable and signal cable 
harness.

See: 

Appendix F: Battery Extension Kit - Installation Procedure

Summary of Contents for PODS 16.48-16000 1940 HEX











































































































































































Reviews:

No comments