Power Electronics Profipower, Manual

Page: 37 / 51

POWER ELECTRONICS PROFIPOWER
TRIAL RUN
35
The gateway supports the following Modbus slaves:
ƒ
Variable Speed Drive of SD700 Series.
ƒ
Variable Speed Drive of SD450 Series.
ƒ
Variable Speed Drive of SD250 Series.
ƒ
Digital Soft-Started of V5 Series.
Note : To connect other slaves, contact with Power Electronics.
Finally, also the parameters related to the Modbus communication
can be configured:
ƒ
Transmission Speed (Baud rate)
ƒ
Exceeded Time (Time out)
ƒ
Stop bit
ƒ
Parity bit
ƒ
Retries
4.3.2. Profipower Type 2 Module
For this module it can be defined up to 20 Scenarios, 10 for the write
command and the other 5 for the read command. It is a generic
module and, therefore, it is independent of the equipment connected
to the gateway. For this reason, user will be responsible of the
knowledge of the valid Modbus registers for the equipment that is
going to be connected.
The defined frames for this module are: 120 bytes of Data-Output
and 120 bytes of Data-Input.