Power Electronics Profipower, Manual

Page: 26 / 51

PROFIPOWER POWER ELECTRONICS
If it does not find any answer, display will show Error 1.
Figure 3.13 Message of Error 1 – Modbus communication error
The Profibus part of the gateway starts completely for the purposes of
configuration by the Profibus Master. Obviously, the sending and
reception through Modbus will not be realized until the Modbus part is
initialized.
If the Profibus address is changed, the gateway will be restarted and
the process will be repeated.
3.4. Display and Faults Code
The display that indicates the status will show different messages
according to the following codification:
Display Message Description
Consecutive
lighting of all of the
leds
Firmware reset of the
gateway.
It is searching a Modbus
device.
"b" blinking
24
INSTALLATION AND CONNECTION