Power Electronics Profipower, Manual

Page: 30 / 51

PROFIPOWER POWER ELECTRONICS
4.1.4. Errors referred to the configuration
o
Err. WR REG. NUMBER
Number of writing registers is not valid.
o
Err. RD REG. NUMBER
Number of reading registers is not valid.
o
Err. PARAM. LENGTH
Parameters length is not valid.
o
Err. SCEN. NUMBER
Number of scenarios is not valid.
o
Err. MODBUS DEVICE
Fault in the Modbus part.
o Err. CONFIG. FRAME
Fault in the Profibus frame.
o
Err1: MODBUS CRC
Error CRC.
o
Err2: FN UNKNOWN
Unknown Modbus function.
o
Err4: MODBUS Timeout
Communication fault. Exceeded time.
28
TRIAL RUN